Index

_

__eq__() (Halfedge method) (Site method) __extent (SiteList attribute) __iter__() (SiteList method) (SiteList.Iterator method) __len__() (PriorityQueue method) (SiteList method) __lt__() (Halfedge method) (Site method) __sitenum (SiteList attribute) __sites (SiteList attribute) __str__() (Layer method) (Segment method) __version__ (in module fabex.version) __xmax (SiteList attribute) __xmin (SiteList attribute)

__ymax (SiteList attribute) __ymin (SiteList attribute) _backup_render_settings() (in module fabex.utilities.image_utils) _calc_path() (in module fabex.operators.path_ops) _getextent() (SiteList method) _getxmax() (SiteList method) _getxmin() (SiteList method) _getymax() (SiteList method) _getymin() (SiteList method) _internal_x_y_distance_to() (in module fabex.utilities.chunk_utils) _is_cancelled (AsyncOperatorMixin attribute) _IS_LOADING_DEFAULTS (in module fabex.constants) _offset_inner_loop() (in module fabex.utilities.image_utils) _optimize_internal() (in module fabex.utilities.chunk_utils) _PREVIOUS_OCL_MESH (in module fabex.constants) _restore_render_settings() (in module fabex.utilities.image_utils)

A

a (Edge attribute), [1] a_along_x (CAM_OPERATION_Properties attribute), [1] activate() (in module fabex.utilities.simple_utils) active_name() (in module fabex.utilities.simple_utils) active_operation (CAM_CHAIN_Properties attribute), [1] active_to_coords() (in module fabex.utilities.simple_utils) active_to_shapely_poly() (in module fabex.utilities.simple_utils) adapt_distance() (CamPathChunk method) adaptive (CamCurveMortise attribute), [1] add_auto_bridges() (in module fabex.bridges) add_bound_rectangle() (in module fabex.utilities.simple_utils) add_bridge() (in module fabex.bridges) add_correction() (in module fabex.bas_relief) add_loop() (in module fabex.utilities.loop_utils) add_machine_area_object() (in module fabex.utilities.machine_utils) add_material_area_object() (in module fabex.utilities.material_utils) add_mesh_for_medial (CAM_OPERATION_Properties attribute), [1] add_orientation_object() (in module fabex.utilities.orient_utils) add_overcut() (in module fabex.utilities.simple_utils) add_pocket() (in module fabex.strategy) add_pocket_for_medial (CAM_OPERATION_Properties attribute), [1] add_rectangle() (in module fabex.utilities.simple_utils) add_segment() (GcodeModel method) add_to_group() (in module fabex.utilities.simple_utils) add_transparent_material() (in module fabex.utilities.material_utils) addon_dependencies() (in module fabex.utilities.addon_utils) AddPresetCamCutter (class in fabex.operators) (class in fabex.operators.preset_ops) AddPresetCamMachine (class in fabex.operators) (class in fabex.operators.preset_ops) AddPresetCamOperation (class in fabex.operators) (class in fabex.operators.preset_ops) addTestCurve() (in module fabex.testing) addTestMesh() (in module fabex.testing) advanced (DoBasRelief attribute), [1]

align (CamOffsetSilhouete attribute), [1] ambient (CAM_OPERATION_Properties attribute), [1] ambient_behaviour (CAM_OPERATION_Properties attribute), [1] ambient_cutter_restrict (CAM_OPERATION_Properties attribute), [1] ambient_radius (CAM_OPERATION_Properties attribute), [1] amplitude (CamSineCurve attribute), [1] amplitude_a (CamLissajousCurve attribute), [1] amplitude_b (CamLissajousCurve attribute), [1] amplitude_z (CamLissajousCurve attribute), [1] angle (CamCurveHatch attribute), [1] (CamCurvePuzzle attribute), [1] angle() (in module fabex.joinery) angle_difference() (in module fabex.joinery) angleb (CamCurvePuzzle attribute), [1] append() (CamPathChunk method) apply_stroke() (in module fabex.utilities.image_utils) arc() (in module fabex.puzzle_joinery) arc_bar() (in module fabex.puzzle_joinery) arc_bar_arc() (in module fabex.puzzle_joinery) array (CAM_OPERATION_Properties attribute), [1] array_x_count (CAM_OPERATION_Properties attribute), [1] array_x_distance (CAM_OPERATION_Properties attribute), [1] array_y_count (CAM_OPERATION_Properties attribute), [1] array_y_distance (CAM_OPERATION_Properties attribute), [1] asolve() (in module fabex.bas_relief) AsyncCancelledException AsyncOperatorMixin (class in fabex.operators.async_op) AsyncTestOperator (class in fabex.operators.async_op) atimes() (in module fabex.bas_relief) attenuation (DoBasRelief attribute), [1] auto_cut_bridge() (in module fabex.bridges) auto_export (CAM_OPERATION_Properties attribute), [1] axis (CamSineCurve attribute), [1] axis_4 (CAM_MACHINE_Properties attribute), [1] axis_5 (CAM_MACHINE_Properties attribute), [1]

B

b (Edge attribute), [1] backlash (CamCurveGear attribute), [1] backlight (CamCurveIntarsion attribute), [1] backlight_depth_from_top (CamCurveIntarsion attribute), [1] ball_radius (CAM_OPERATION_Properties attribute), [1] bar() (in module fabex.puzzle_joinery) base_gender (CamCurvePuzzle attribute), [1] base_thickness (CamCurveIntarsion attribute), [1] beat_period (CamSineCurve attribute), [1] BIG_FLOAT (in module fabex.constants) bisect() (Edge static method) bit_diameter (DoBasRelief attribute), [1] bl_idname (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] (AsyncTestOperator attribute) (CalculatePath attribute), [1] (CAM_MATERIAL_PositionObject attribute), [1] (CamAddonPreferences attribute), [1] (CamBridgesAdd attribute), [1] (CamChainAdd attribute), [1] (CamChainOperationAdd attribute), [1] (CamChainOperationDown attribute), [1] (CamChainOperationRemove attribute), [1] (CamChainOperationUp attribute), [1] (CamChainRemove attribute), [1] (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveBoolean attribute), [1] (CamCurveConvexHull attribute), [1] (CamCurveDrawer attribute), [1] (CamCurveFlatCone attribute), [1] (CamCurveGear attribute), [1] (CamCurveHatch attribute), [1] (CamCurveIntarsion attribute), [1] (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] (CamCurveRemoveDoubles attribute), [1] (CamCurveSimpleOvercuts attribute), [1] (CamCustomCurve attribute), [1] (CamHypotrochoidCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamMeshGetPockets attribute), [1] (CamObjectSilhouette attribute), [1] (CamOffsetSilhouete attribute), [1] (CamOperationAdd attribute), [1] (CamOperationCopy attribute), [1] (CamOperationMove attribute), [1] (CamOperationRemove attribute), [1] (CamOrientationAdd attribute), [1] (CamPackObjects attribute), [1] (CAMSimulate attribute), [1] (CAMSimulateChain attribute), [1] (CamSineCurve attribute), [1] (CamSliceObjects attribute), [1] (DoBasRelief attribute), [1] (FABEX_ENGINE attribute), [1] (KillPathsBackground attribute), [1] (PathExport attribute), [1] (PathExportChain attribute), [1] (PathsAll attribute), [1] (PathsBackground attribute), [1] (PathsChain attribute), [1] (ProblemAreas attribute), [1] (WM_OT_gcode_import attribute), [1] bl_label (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] (AsyncTestOperator attribute) (CalculatePath attribute), [1] (CAM_MATERIAL_PositionObject attribute), [1] (CamBridgesAdd attribute), [1] (CamChainAdd attribute), [1] (CamChainOperationAdd attribute), [1] (CamChainOperationDown attribute), [1] (CamChainOperationRemove attribute), [1] (CamChainOperationUp attribute), [1] (CamChainRemove attribute), [1] (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveBoolean attribute), [1] (CamCurveConvexHull attribute), [1] (CamCurveDrawer attribute), [1] (CamCurveFlatCone attribute), [1] (CamCurveGear attribute), [1] (CamCurveHatch attribute), [1] (CamCurveIntarsion attribute), [1] (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] (CamCurveRemoveDoubles attribute), [1] (CamCurveSimpleOvercuts attribute), [1] (CamCustomCurve attribute), [1] (CamHypotrochoidCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamMeshGetPockets attribute), [1] (CamObjectSilhouette attribute), [1] (CamOffsetSilhouete attribute), [1] (CamOperationAdd attribute), [1] (CamOperationCopy attribute), [1] (CamOperationMove attribute), [1] (CamOperationRemove attribute), [1] (CamOrientationAdd attribute), [1] (CamPackObjects attribute), [1] (CAMSimulate attribute), [1] (CAMSimulateChain attribute), [1] (CamSineCurve attribute), [1] (CamSliceObjects attribute), [1] (DoBasRelief attribute), [1] (FABEX_ENGINE attribute), [1] (KillPathsBackground attribute), [1] (PathExport attribute), [1] (PathExportChain attribute), [1] (PathsAll attribute), [1] (PathsBackground attribute), [1] (PathsChain attribute), [1] (ProblemAreas attribute), [1] (WM_OT_gcode_import attribute), [1]

bl_options (AsyncTestOperator attribute) (CalculatePath attribute), [1] (CAM_MATERIAL_PositionObject attribute), [1] (CamBridgesAdd attribute), [1] (CamChainAdd attribute), [1] (CamChainOperationAdd attribute), [1] (CamChainOperationDown attribute), [1] (CamChainOperationRemove attribute), [1] (CamChainOperationUp attribute), [1] (CamChainRemove attribute), [1] (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveBoolean attribute), [1] (CamCurveConvexHull attribute), [1] (CamCurveDrawer attribute), [1] (CamCurveFlatCone attribute), [1] (CamCurveGear attribute), [1] (CamCurveHatch attribute), [1] (CamCurveIntarsion attribute), [1] (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] (CamCurveRemoveDoubles attribute), [1] (CamCurveSimpleOvercuts attribute), [1] (CamCustomCurve attribute), [1] (CamHypotrochoidCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamMeshGetPockets attribute), [1] (CamObjectSilhouette attribute), [1] (CamOffsetSilhouete attribute), [1] (CamOperationAdd attribute), [1] (CamOperationCopy attribute), [1] (CamOperationMove attribute), [1] (CamOperationRemove attribute), [1] (CamOrientationAdd attribute), [1] (CamPackObjects attribute), [1] (CAMSimulate attribute), [1] (CAMSimulateChain attribute), [1] (CamSineCurve attribute), [1] (CamSliceObjects attribute), [1] (DoBasRelief attribute), [1] (KillPathsBackground attribute), [1] (PathExport attribute), [1] (PathExportChain attribute), [1] (PathsAll attribute), [1] (PathsBackground attribute), [1] (PathsChain attribute), [1] (ProblemAreas attribute), [1] bl_use_eevee_viewport (FABEX_ENGINE attribute), [1] block_number_increment (CAM_MACHINE_Properties attribute), [1] boolean_type (CamCurveBoolean attribute), [1] borderwidth (CAM_OPERATION_Properties attribute), [1] break_path_for_leadin_leadout() (CamPathChunk method) bridges_collection_name (CAM_OPERATION_Properties attribute), [1] bridges_height (CAM_OPERATION_Properties attribute), [1] bridges_width (CAM_OPERATION_Properties attribute), [1] build_mesh() (in module fabex.bas_relief) build_stroke() (in module fabex.utilities.image_utils) bull_corner_radius (CAM_OPERATION_Properties attribute), [1] BULLET_SCALE (in module fabex.constants)

C

c (Edge attribute), [1] calculate_defect() (in module fabex.bas_relief) CalculatePath (class in fabex.operators) (class in fabex.operators.path_ops) CAM_CHAIN_Properties (class in fabex.properties) (class in fabex.properties.chain_props) CAM_INFO_Properties (class in fabex.properties) (class in fabex.properties.info_props) CAM_INTERFACE_Properties (class in fabex.properties) (class in fabex.properties.interface_props) CAM_MACHINE_Properties (class in fabex.properties) (class in fabex.properties.machine_props) CAM_MATERIAL_PositionObject (class in fabex.operators) (class in fabex.operators.position_op) CAM_MATERIAL_Properties (class in fabex.properties) (class in fabex.properties.material_props) CAM_MOVEMENT_Properties (class in fabex.properties) (class in fabex.properties.movement_props) CAM_OP_REFERENCE_Properties (class in fabex.properties) (class in fabex.properties.chain_props) CAM_OPERATION_Properties (class in fabex) (class in fabex.properties.operation_props) CAM_OPTIMISATION_Properties (class in fabex.properties) (class in fabex.properties.optimisation_props) CamAddonPreferences (class in fabex) (class in fabex.preferences) CamBridgesAdd (class in fabex.operators) (class in fabex.operators.bridges_op) CamChainAdd (class in fabex.operators) (class in fabex.operators.chain_ops) CamChainOperationAdd (class in fabex.operators) (class in fabex.operators.chain_ops) CamChainOperationDown (class in fabex.operators) (class in fabex.operators.chain_ops) CamChainOperationRemove (class in fabex.operators) (class in fabex.operators.chain_ops) CamChainOperationUp (class in fabex.operators) (class in fabex.operators.chain_ops) CamChainRemove (class in fabex.operators) (class in fabex.operators.chain_ops) CamCurveBoneFilletOvercuts (class in fabex.operators) (class in fabex.operators.curve_tools_ops) CamCurveBoolean (class in fabex.operators) (class in fabex.operators.curve_tools_ops) CamCurveConvexHull (class in fabex.operators) (class in fabex.operators.curve_tools_ops) CamCurveDrawer (class in fabex.operators) (class in fabex.operators.curve_create_ops) CamCurveFlatCone (class in fabex.operators) (class in fabex.operators.curve_create_ops) CamCurveGear (class in fabex.operators) (class in fabex.operators.curve_create_ops) CamCurveHatch (class in fabex.operators) (class in fabex.operators.curve_create_ops) CamCurveIntarsion (class in fabex.operators) (class in fabex.operators.curve_tools_ops) CamCurveInterlock (class in fabex.operators) (class in fabex.operators.curve_create_ops) CamCurveMortise (class in fabex.operators) (class in fabex.operators.curve_create_ops) CamCurvePlate (class in fabex.operators) (class in fabex.operators.curve_create_ops) CamCurvePuzzle (class in fabex.operators) (class in fabex.operators.curve_create_ops) CamCurveRemoveDoubles (class in fabex.operators) (class in fabex.operators.curve_tools_ops) CamCurveSimpleOvercuts (class in fabex.operators) (class in fabex.operators.curve_tools_ops) CamCustomCurve (class in fabex.operators) (class in fabex.operators.curve_equation_ops) CamException CamHypotrochoidCurve (class in fabex.operators) (class in fabex.operators.curve_equation_ops) CamLissajousCurve (class in fabex.operators) (class in fabex.operators.curve_equation_ops) CamMeshGetPockets (class in fabex.operators) (class in fabex.operators.curve_tools_ops) CamObjectSilhouette (class in fabex.operators) (class in fabex.operators.curve_tools_ops) CamOffsetSilhouete (class in fabex.operators) (class in fabex.operators.curve_tools_ops) CamOperationAdd (class in fabex.operators) (class in fabex.operators.operation_ops) CamOperationCopy (class in fabex.operators) (class in fabex.operators.operation_ops) CamOperationMove (class in fabex.operators) (class in fabex.operators.operation_ops) CamOperationRemove (class in fabex.operators) (class in fabex.operators.operation_ops) CamOrientationAdd (class in fabex.operators) (class in fabex.operators.orient_op) CamPackObjects (class in fabex.operators) (class in fabex.operators.pack_op) CamPathChunk (class in fabex.cam_chunk) CamPathChunkBuilder (class in fabex.cam_chunk) CAMSimulate (class in fabex.operators) (class in fabex.operators.simulation_ops) CAMSimulateChain (class in fabex.operators) (class in fabex.operators.simulation_ops)

CamSineCurve (class in fabex.operators) (class in fabex.operators.curve_equation_ops) CamSliceObjects (class in fabex.operators) (class in fabex.operators.slice_op) caps (CamOffsetSilhouete attribute), [1] carve_depth (CAM_OPERATION_Properties attribute), [1] center_x (CAM_MATERIAL_Properties attribute), [1] center_y (CAM_MATERIAL_Properties attribute), [1] chain_valid() (in module fabex.utilities.operation_utils) change_data (CAM_OPERATION_Properties attribute), [1] change_path_start() (CamPathChunk method) changed (CAM_OPERATION_Properties attribute), [1] check_equal() (in module fabex.utilities.compare_utils) check_memory_limit() (in module fabex.gcode_path) check_min_z() (in module fabex.strategy) children (CamPathChunk attribute) chipload (CAM_INFO_Properties attribute), [1] chipload_per_tooth (CAM_INFO_Properties attribute), [1] CHIPLOAD_PRECISION (in module fabex.constants) chunk_to_shapely() (in module fabex.utilities.chunk_utils) chunkPointSamplesFromOCL() (in module fabex.utilities.ocl_utils) chunkPointsResampleFromOCL() (in module fabex.utilities.ocl_utils) chunks_coherency() (in module fabex.cam_chunk) chunks_refine() (in module fabex.utilities.chunk_utils) chunks_refine_threshold() (in module fabex.utilities.chunk_utils) chunks_to_mesh() (in module fabex.strategy) chunks_to_shapely() (in module fabex.utilities.chunk_utils) circle() (in module fabex.utilities.geom_utils) circle_detail (CAM_OPTIMISATION_Properties attribute), [1] clamp_max_z() (CamPathChunk method) clamp_z() (CamPathChunk method) classes (in module fabex) (in module fabex.operators) (in module fabex.properties) classify_segments() (GcodeModel method) cleanUp() (in module fabex.testing) cleanup_bullet_collision() (in module fabex.collision) cleanup_indexed() (in module fabex.utilities.index_utils) clearance (CamCurveGear attribute), [1] clip_line() (Context method) clip_points() (CamPathChunk method) closed (CamPathChunk attribute) collection_name (CAM_OPERATION_Properties attribute), [1] collet_size (CAM_MACHINE_Properties attribute), [1] color (GcodeModel attribute) (Segment attribute) comment (GcodeParser attribute) compare() (in module fabex.utilities.simple_utils) compare_z_level() (in module fabex.utilities.compare_utils) compute_delaunay_triangulation() (in module fabex.voronoi) compute_voronoi_diagram() (in module fabex.voronoi) computing (CAM_CHAIN_Properties attribute), [1] (CAM_OP_REFERENCE_Properties attribute), [1] (CAM_OPERATION_Properties attribute), [1] connect_chunks_low() (in module fabex.cam_chunk) Context (class in fabex.voronoi) contour (CamCurveHatch attribute), [1] contour_separate (CamCurveHatch attribute), [1] coords (Segment attribute) copy() (CamPathChunk method) copy_compbuf_data() (in module fabex.bas_relief) copy_if_not_exists() (in module fabex.utilities.addon_utils) copy_presets() (in module fabex.utilities.addon_utils) coroutine (AsyncOperatorMixin attribute) count (PriorityQueue attribute) count() (CamPathChunk method) crazy_path() (in module fabex.utilities.image_utils) crazy_stroke_image() (in module fabex.cam_chunk) crazy_stroke_image_binary() (in module fabex.cam_chunk) crazy_threshold_1 (CAM_OPERATION_Properties attribute), [1] crazy_threshold_2 (CAM_OPERATION_Properties attribute), [1] crazy_threshold_3 (CAM_OPERATION_Properties attribute), [1] crazy_threshold_4 (CAM_OPERATION_Properties attribute), [1] crazy_threshold_5 (CAM_OPERATION_Properties attribute), [1] create_base_plate() (in module fabex.joinery) create_flex_side() (in module fabex.joinery) create_parametric_curve() (in module fabex.parametric) create_simulation_object() (in module fabex.simulation) curve() (in module fabex.strategy) curve_source (CAM_OPERATION_Properties attribute), [1] curve_target (CAM_OPERATION_Properties attribute), [1] curve_to_chunks() (in module fabex.cam_chunk) curve_to_shapely() (in module fabex.cam_chunk) curved_t() (in module fabex.puzzle_joinery) cut_loops() (in module fabex.utilities.loop_utils) cut_type (CAM_OPERATION_Properties attribute), [1] cutout() (in module fabex.strategy) cutter_description (CAM_OPERATION_Properties attribute), [1] cutter_diameter (CAM_OPERATION_Properties attribute), [1] cutter_flutes (CAM_OPERATION_Properties attribute), [1] cutter_id (CAM_OPERATION_Properties attribute), [1] cutter_length (CAM_OPERATION_Properties attribute), [1] cutter_object_name (CAM_OPERATION_Properties attribute), [1] CUTTER_OFFSET (in module fabex.constants) cutter_tip_angle (CAM_OPERATION_Properties attribute), [1] cutter_type (CAM_OPERATION_Properties attribute), [1] cylcone_diameter (CAM_OPERATION_Properties attribute), [1]

D

d (CamHypotrochoidCurve attribute), [1] d_slope_array() (in module fabex.joinery) debug (Context attribute) decimate_ratio (DoBasRelief attribute), [1] dedupe_points() (CamPathChunk method) default_interface_level (CamAddonPreferences attribute), [1] default_layout (CamAddonPreferences attribute), [1] default_machine_preset (CamAddonPreferences attribute), [1] default_main_location (CamAddonPreferences attribute), [1] default_operation_location (CamAddonPreferences attribute), [1] default_shading (CamAddonPreferences attribute), [1] default_tools_location (CamAddonPreferences attribute), [1] delete() (EdgeList method) (PriorityQueue method) delete_object() (in module fabex.utilities.simple_utils) DELETED (Edge attribute) deleteFirstVert() (in module fabex.testing) deltax (EdgeList attribute) deltay (PriorityQueue attribute) depth (CamCurveDrawer attribute), [1] (CamPathChunkBuilder attribute) depth_exponent (DoBasRelief attribute), [1] derive_bezier_handles() (in module fabex.parametric) deselect() (in module fabex.utilities.simple_utils) detail_enhancement_amount (DoBasRelief attribute), [1] detail_enhancement_use (DoBasRelief attribute), [1] diameter (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveIntarsion attribute), [1] (CamCurvePuzzle attribute), [1] (CamCurveSimpleOvercuts attribute), [1] dict_cleanup() (in module fabex.utilities.dict_utils) dict_remove() (in module fabex.utilities.dict_utils) difference() (in module fabex.utilities.simple_utils) dilate_array() (in module fabex.utilities.image_utils) dip (CamHypotrochoidCurve attribute), [1] direction (CamOperationMove attribute), [1] distance (CamCurveHatch attribute), [1] (CamPackObjects attribute), [1] (Layer attribute) distance() (CamPathChunk method) (Site method) distance_2d() (in module fabex.utilities.simple_utils) distance_along_paths (CAM_OPERATION_Properties attribute), [1] distance_between_paths (CAM_OPERATION_Properties attribute), [1]

distance_start() (CamPathChunk method) distributed_interlock() (in module fabex.joinery) do_G1() (GcodeModel method) do_G92() (GcodeModel method) do_invert (CamCurveBoneFilletOvercuts attribute), [1] do_M163() (GcodeModel method) do_outer (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveSimpleOvercuts attribute), [1] do_simulation() (in module fabex.simulation) do_simulation_feedrate (CAM_OPERATION_Properties attribute), [1] DoBasRelief (class in fabex.operators) (class in fabex.operators.bas_relief_ops) dont_merge (CAM_OPERATION_Properties attribute), [1] doPrint (Context attribute) double_adaptive (CamCurveMortise attribute), [1] draw() (CAM_MATERIAL_PositionObject method), [1] (CamAddonPreferences method), [1] (CamCurveDrawer method), [1] (CamCurveGear method), [1] (CamCurveHatch method), [1] (CamCurvePlate method), [1] (CamCurvePuzzle method), [1] (CamCurveRemoveDoubles method), [1] (CamOffsetSilhouete method), [1] (CamPackObjects method), [1] (CAMSimulate method), [1] (CAMSimulateChain method), [1] (CamSliceObjects method), [1] (DoBasRelief method), [1] (GcodeModel method) (PathsAll method), [1] draw_interface() (in module fabex.properties) (in module fabex.properties.interface_props) drawer_hole_diameter (CamCurveDrawer attribute), [1] drawer_hole_offset (CamCurveDrawer attribute), [1] drawer_plate_thickness (CamCurveDrawer attribute), [1] drill() (in module fabex.strategy) drill_type (CAM_OPERATION_Properties attribute), [1] DT (in module fabex.constants) dump() (Edge method) (Halfedge method) (Site method) duplicate() (in module fabex.utilities.simple_utils) duplicate_object() (in module fabex.utilities.simple_utils) duration (CAM_INFO_Properties attribute), [1]

E

Edge (class in fabex.voronoi) edge (Halfedge attribute), [1] EDGE_NUM (Edge attribute) EdgeList (class in fabex.voronoi) edgenum (Edge attribute), [1] edges (Context attribute) enable_a_axis (CAM_OPERATION_Properties attribute), [1] enable_b_axis (CAM_OPERATION_Properties attribute), [1] enable_dust (CAM_OPERATION_Properties attribute), [1] enable_hold (CAM_OPERATION_Properties attribute), [1] enable_mist (CAM_OPERATION_Properties attribute), [1] ending_position (CAM_MACHINE_Properties attribute), [1] endpoints (CamPathChunkBuilder attribute) ep (Edge attribute), [1] EPS (in module fabex.constants) error() (GcodeModel method) (GcodeParser method) estimate_from_model (CAM_MATERIAL_Properties attribute), [1] eval_splitting (CAM_MACHINE_Properties attribute), [1] exact_subdivide_edges (CAM_OPTIMISATION_Properties attribute), [1] execute() (AsyncOperatorMixin method) (CAM_MATERIAL_PositionObject method), [1] (CamBridgesAdd method), [1] (CamChainAdd method), [1] (CamChainOperationAdd method), [1] (CamChainOperationDown method), [1] (CamChainOperationRemove method), [1] (CamChainOperationUp method), [1] (CamChainRemove method), [1] (CamCurveBoneFilletOvercuts method), [1] (CamCurveBoolean method), [1] (CamCurveConvexHull method), [1] (CamCurveDrawer method), [1] (CamCurveFlatCone method), [1] (CamCurveGear method), [1] (CamCurveHatch method), [1] (CamCurveIntarsion method), [1] (CamCurveInterlock method), [1] (CamCurveMortise method), [1] (CamCurvePlate method), [1] (CamCurvePuzzle method), [1] (CamCurveRemoveDoubles method), [1] (CamCurveSimpleOvercuts method), [1] (CamCustomCurve method), [1] (CamHypotrochoidCurve method), [1] (CamLissajousCurve method), [1] (CamMeshGetPockets method), [1] (CamObjectSilhouette method), [1] (CamOffsetSilhouete method), [1] (CamOperationAdd method), [1] (CamOperationCopy method), [1] (CamOperationMove method), [1] (CamOperationRemove method), [1] (CamOrientationAdd method), [1] (CamPackObjects method), [1] (CamSineCurve method), [1] (CamSliceObjects method), [1] (DoBasRelief method), [1] (KillPathsBackground method), [1] (PathExport method), [1] (PathExportChain method), [1] (PathsAll method), [1] (PathsBackground method), [1] (ProblemAreas method), [1] (WM_OT_gcode_import method), [1]

execute_async() (AsyncTestOperator method) (CalculatePath method), [1] (CAMSimulate method), [1] (CAMSimulateChain method), [1] (PathsChain method), [1] export_gcode_path() (in module fabex.gcode_path) exportModelsToSTL() (in module fabex.utilities.ocl_utils) extend() (CamPathChunk method) extend_chunks_5_axis() (in module fabex.utilities.chunk_utils) extent (Context attribute) (SiteList attribute) extrudate (Layer attribute)

F

fabex module fabex.bas_relief module fabex.bridges module fabex.cam_chunk module fabex.collision module fabex.constants module fabex.engine module fabex.exception module fabex.gcode_import_parser module fabex.gcode_path module fabex.involute_gear module fabex.joinery module fabex.operators module fabex.operators.async_op module fabex.operators.bas_relief_ops module fabex.operators.bridges_op module fabex.operators.chain_ops module fabex.operators.curve_create_ops module fabex.operators.curve_equation_ops module fabex.operators.curve_tools_ops module fabex.operators.gcode_import_op module fabex.operators.operation_ops module fabex.operators.orient_op module fabex.operators.pack_op module fabex.operators.path_ops module fabex.operators.position_op module fabex.operators.preset_ops module fabex.operators.simulation_ops module fabex.operators.slice_op module fabex.pack module fabex.parametric module fabex.pattern module fabex.preferences module fabex.properties module fabex.properties.chain_props module fabex.properties.info_props module fabex.properties.interface_props module fabex.properties.machine_props module fabex.properties.material_props module fabex.properties.movement_props module fabex.properties.operation_props module fabex.properties.optimisation_props module fabex.puzzle_joinery module fabex.simulation module

fabex.slice module fabex.strategy module fabex.testing module fabex.utilities module fabex.utilities.addon_utils module fabex.utilities.async_utils module fabex.utilities.bounds_utils module fabex.utilities.chunk_utils module fabex.utilities.compare_utils module fabex.utilities.dict_utils module fabex.utilities.geom_utils module fabex.utilities.image_utils module fabex.utilities.index_utils module fabex.utilities.loop_utils module fabex.utilities.machine_utils module fabex.utilities.material_utils module fabex.utilities.numba_utils module fabex.utilities.ocl_utils module fabex.utilities.operation_utils module fabex.utilities.orient_utils module fabex.utilities.shapely_utils module fabex.utilities.simple_utils module fabex.utilities.strategy_utils module fabex.utilities.thread_utils module fabex.utilities.version_utils module fabex.version module fabex.voronoi module FABEX_ENGINE (class in fabex) (class in fabex.engine) feedrate (CAM_OPERATION_Properties attribute), [1] feedrate_default (CAM_MACHINE_Properties attribute), [1] feedrate_max (CAM_MACHINE_Properties attribute), [1] feedrate_min (CAM_MACHINE_Properties attribute), [1] filename (CAM_CHAIN_Properties attribute), [1] (CAM_OPERATION_Properties attribute), [1] filename_ext (WM_OT_gcode_import attribute), [1] filter_glob (WM_OT_gcode_import attribute), [1] find_slope() (in module fabex.joinery) finger() (in module fabex.puzzle_joinery) finger_amount (CamCurveInterlock attribute), [1] (CamCurvePuzzle attribute), [1] finger_amount() (in module fabex.joinery) finger_inset (CamCurveDrawer attribute), [1] finger_pair() (in module fabex.joinery) finger_size (CamCurveDrawer attribute), [1] (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] finger_tolerance (CamCurveDrawer attribute), [1] (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] (CamCurvePuzzle attribute), [1] fingers() (in module fabex.puzzle_joinery) first_down (CAM_OPERATION_Properties attribute), [1] fix_units() (in module fabex.utilities.addon_utils) fixed_angle (CamCurveInterlock attribute), [1] fixed_finger() (in module fabex.joinery) flex_pocket (CamCurveMortise attribute), [1] flip_x() (CamPathChunk method) format_edges_output() (in module fabex.voronoi) format_polygons_output() (in module fabex.voronoi) free_height (CAM_MOVEMENT_Properties attribute), [1]

G

G64 (CAM_MOVEMENT_Properties attribute), [1] G64_INCOMPATIBLE_MACHINES (in module fabex.constants) gcode_header (CAM_OPERATION_Properties attribute), [1] gcode_start_dust_cmd (CAM_OPERATION_Properties attribute), [1] gcode_start_hold_cmd (CAM_OPERATION_Properties attribute), [1] gcode_start_mist_cmd (CAM_OPERATION_Properties attribute), [1] gcode_stop_dust_cmd (CAM_OPERATION_Properties attribute), [1] gcode_stop_hold_cmd (CAM_OPERATION_Properties attribute), [1] gcode_stop_mist_cmd (CAM_OPERATION_Properties attribute), [1] gcode_trailer (CAM_OPERATION_Properties attribute), [1] GcodeModel (class in fabex.gcode_import_parser) GcodeParser (class in fabex.gcode_import_parser) gear() (in module fabex.involute_gear) gear_iang() (in module fabex.involute_gear) gear_polar() (in module fabex.involute_gear) gear_q6() (in module fabex.involute_gear) gear_q7() (in module fabex.involute_gear) gear_type (CamCurveGear attribute), [1] gender (CamCurvePuzzle attribute), [1] generate_crosshatch() (in module fabex.operators.curve_create_ops) generate_simulation_image() (in module fabex.simulation) geometry_source (CAM_OPERATION_Properties attribute), [1] get_ambient() (in module fabex.cam_chunk) get_bounds() (in module fabex.utilities.bounds_utils) get_bounds_multiple() (in module fabex.utilities.bounds_utils) get_bounds_worldspace() (in module fabex.utilities.bounds_utils) get_bridges_poly() (in module fabex.bridges) get_bucket() (PriorityQueue method) get_cache_path() (in module fabex.utilities.simple_utils) get_chain_operations() (in module fabex.utilities.operation_utils) get_change_data() (in module fabex.gcode_path) get_circle() (in module fabex.utilities.image_utils) get_circle_binary() (in module fabex.utilities.image_utils) get_clip_edges() (Context method) get_clip_polygons() (Context method)

get_closest_chunk() (in module fabex.utilities.chunk_utils) get_container() (in module fabex.utilities.geom_utils) get_cutter_array() (in module fabex.utilities.image_utils) get_cutter_bullet() (in module fabex.collision) get_hash() (EdgeList method) get_layers() (in module fabex.strategy) get_length() (CamPathChunk method) get_min_point() (PriorityQueue method) get_next_closest() (CamPathChunk method) get_object_outline() (in module fabex.cam_chunk) get_object_silhouette() (in module fabex.cam_chunk) get_oclSTL() (in module fabex.utilities.ocl_utils) get_offset_image_cavities() (in module fabex.cam_chunk) get_operation_silhouette() (in module fabex.cam_chunk) get_operation_sources() (in module fabex.utilities.operation_utils) get_panels() (in module fabex) (in module fabex.engine) get_path() (in module fabex.gcode_path) get_path_3_axis() (in module fabex.gcode_path) get_path_4_axis() (in module fabex.gcode_path) get_path_pattern() (in module fabex.pattern) get_path_pattern_4_axis() (in module fabex.pattern) get_path_pattern_parallel() (in module fabex.pattern) get_point() (CamPathChunk method) get_points() (CamPathChunk method) get_points_np() (CamPathChunk method) get_resolution() (in module fabex.utilities.image_utils) get_sample_bullet() (in module fabex.collision) get_sample_bullet_n_axis() (in module fabex.collision) get_sample_image() (in module fabex.utilities.image_utils) get_simulation_path() (in module fabex.utilities.simple_utils) get_spline_bounds() (in module fabex.utilities.bounds_utils) get_strategy_list() (in module fabex.utilities.strategy_utils) get_vector_right() (in module fabex.utilities.compare_utils) gradient_scaling_mask_name (DoBasRelief attribute), [1] gradient_scaling_mask_use (DoBasRelief attribute), [1]

H

Halfedge (class in fabex.voronoi) hash (EdgeList attribute) (PriorityQueue attribute) hashsize (EdgeList attribute) (PriorityQueue attribute) height (CamCurveDrawer attribute), [1] (CamCurveFlatCone attribute), [1] (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] height_mm (DoBasRelief attribute), [1] helix() (in module fabex.utilities.geom_utils)

helix_diameter (CAM_MOVEMENT_Properties attribute), [1] helix_enter (CAM_MOVEMENT_Properties attribute), [1] hide_all_others (CAM_OPERATION_Properties attribute), [1] hole_diameter (CamCurveGear attribute), [1] (CamCurvePlate attribute), [1] hole_hamount (CamCurvePlate attribute), [1] hole_hdist (CamCurvePlate attribute), [1] hole_tolerance (CamCurvePlate attribute), [1] hole_vdist (CamCurvePlate attribute), [1] horizontal_finger() (in module fabex.joinery) hourly_rate (CAM_MACHINE_Properties attribute), [1] hub_diameter (CamCurveGear attribute), [1]

I

idx() (in module fabex.bas_relief) image_edge_search_on_line() (in module fabex.cam_chunk) image_to_chunks() (in module fabex.cam_chunk) image_to_numpy() (in module fabex.utilities.image_utils) image_to_shapely() (in module fabex.cam_chunk) imgres_limit (CAM_OPTIMISATION_Properties attribute), [1] import_gcode() (in module fabex.gcode_import_parser) in_extent() (Context method) index (CAM_CHAIN_Properties attribute), [1] indexes (CamSliceObjects attribute), [1] info (CAM_OPERATION_Properties attribute), [1] insert() (CamPathChunk method) (EdgeList method) (PriorityQueue method) insideout (CAM_MOVEMENT_Properties attribute), [1] intake (CamCurveFlatCone attribute), [1] intake_skew (CamCurveFlatCone attribute), [1] intarsion_thickness (CamCurveIntarsion attribute), [1] interlock_amount (CamCurvePuzzle attribute), [1] interlock_groove() (in module fabex.joinery) interlock_twist() (in module fabex.joinery) interlock_twist_separator() (in module fabex.joinery) interlock_type (CamCurveInterlock attribute), [1] (CamCurvePuzzle attribute), [1]

intersect() (Halfedge method) (in module fabex.utilities.simple_utils) invalid_reason (CAM_CHAIN_Properties attribute), [1] inverse (CAM_OPERATION_Properties attribute), [1] invert (CamCurveSimpleOvercuts attribute), [1] invoke() (CamCurveBoneFilletOvercuts method), [1] (CamCurveBoolean method), [1] (CamCurveIntarsion method), [1] (CamCurveRemoveDoubles method), [1] (CamCurveSimpleOvercuts method), [1] (CamOffsetSilhouete method), [1] (CamPackObjects method), [1] (CamSliceObjects method), [1] (DoBasRelief method), [1] is_below_z() (CamPathChunk method) is_empty() (PriorityQueue method) is_equal() (in module fabex.voronoi) is_point_right_of() (Halfedge method) is_straight() (CamOffsetSilhouete method), [1] is_vertical_limit() (in module fabex.utilities.simple_utils) isRelative (GcodeModel attribute) iteration (CamCustomCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamSineCurve attribute), [1] iterator() (SiteList method)

J

jit() (in module fabex.utilities.numba_utils) join_multiple() (in module fabex.utilities.simple_utils)

justify_x (DoBasRelief attribute), [1] justify_y (DoBasRelief attribute), [1] justify_z (DoBasRelief attribute), [1]

K

keep_bezier (CamCurveRemoveDoubles attribute), [1] keymap_register() (in module fabex) (in module fabex.utilities.addon_utils)

keymap_unregister() (in module fabex) (in module fabex.utilities.addon_utils) KillPathsBackground (class in fabex.operators) (class in fabex.operators.path_ops)

L

large_d (CamCurveFlatCone attribute), [1] laser_cmd (CAM_OPERATION_Properties attribute), [1] laser_delay (CAM_OPERATION_Properties attribute), [1] laser_off (CAM_OPERATION_Properties attribute), [1] laser_on (CAM_OPERATION_Properties attribute), [1] lasttext (threadCom attribute) Layer (class in fabex.gcode_import_parser) layerIdx (Segment attribute) layers (GcodeModel attribute) layout (CAM_INTERFACE_Properties attribute), [1] LE (Edge attribute) lead_contour() (CamPathChunk method) lead_in (CAM_OPERATION_Properties attribute), [1] lead_out (CAM_OPERATION_Properties attribute), [1]

left (Halfedge attribute), [1] left_bnd() (EdgeList method) left_reg() (Halfedge method) leftend (EdgeList attribute) length (CamPathChunk attribute) level (CAM_INTERFACE_Properties attribute), [1] limit_chunks() (in module fabex.cam_chunk) limit_curve (CAM_OPERATION_Properties attribute), [1] linbcg_iterations (DoBasRelief attribute), [1] line (Segment attribute) linear_bcg() (in module fabex.bas_relief) lineNb (Segment attribute) lines (Context attribute) load_defaults() (in module fabex.utilities.addon_utils)

M

machine_axes (CAM_OPERATION_Properties attribute), [1] main_location (CAM_INTERFACE_Properties attribute), [1] make_active() (in module fabex.utilities.simple_utils) make_edge_loops() (in module fabex.parametric) make_flex_pocket() (in module fabex.joinery) make_variable_flex_pocket() (in module fabex.joinery) make_visible() (in module fabex.utilities.chunk_utils) material (CAM_OPERATION_Properties attribute), [1] max (CAM_OPERATION_Properties attribute), [1] MAX_OPERATION_TIME (in module fabex.constants) max_segment_size (WM_OT_gcode_import attribute), [1] max_t (CamCustomCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamSineCurve attribute), [1] max_z (CAM_OPERATION_Properties attribute), [1] medial_axis() (in module fabex.strategy) medial_axis_subdivision (CAM_OPERATION_Properties attribute), [1] medial_axis_threshold (CAM_OPERATION_Properties attribute), [1] merge_distance (CAM_MOVEMENT_Properties attribute), [1] (CamCurveRemoveDoubles attribute), [1] mesh_from_curve() (in module fabex.utilities.chunk_utils) mesh_from_curve_to_chunk() (in module fabex.cam_chunk) min (CAM_OPERATION_Properties attribute), [1] min_finger_size (CamCurveMortise attribute), [1] min_gridsize (DoBasRelief attribute), [1] min_t (CamCustomCurve attribute), [1] (CamLissajousCurve attribute), [1] (CamSineCurve attribute), [1] min_z (CAM_OPERATION_Properties attribute), [1] min_z_from (CAM_OPERATION_Properties attribute), [1] minidx (PriorityQueue attribute) mirror_x() (in module fabex.utilities.simple_utils) mirror_y() (in module fabex.utilities.simple_utils) mitre (CamCurvePuzzle attribute), [1] mitre() (in module fabex.puzzle_joinery) mitre_limit (CamOffsetSilhouete attribute), [1] modal() (AsyncOperatorMixin method) model (GcodeParser attribute) module fabex fabex.bas_relief fabex.bridges fabex.cam_chunk fabex.collision fabex.constants fabex.engine fabex.exception fabex.gcode_import_parser fabex.gcode_path fabex.involute_gear fabex.joinery fabex.operators fabex.operators.async_op fabex.operators.bas_relief_ops fabex.operators.bridges_op fabex.operators.chain_ops fabex.operators.curve_create_ops fabex.operators.curve_equation_ops fabex.operators.curve_tools_ops fabex.operators.gcode_import_op fabex.operators.operation_ops fabex.operators.orient_op fabex.operators.pack_op fabex.operators.path_ops fabex.operators.position_op fabex.operators.preset_ops fabex.operators.simulation_ops fabex.operators.slice_op fabex.pack fabex.parametric fabex.pattern fabex.preferences fabex.properties fabex.properties.chain_props fabex.properties.info_props fabex.properties.interface_props fabex.properties.machine_props fabex.properties.material_props fabex.properties.movement_props fabex.properties.operation_props fabex.properties.optimisation_props fabex.puzzle_joinery fabex.simulation fabex.slice fabex.strategy fabex.testing fabex.utilities fabex.utilities.addon_utils fabex.utilities.async_utils fabex.utilities.bounds_utils fabex.utilities.chunk_utils fabex.utilities.compare_utils fabex.utilities.dict_utils fabex.utilities.geom_utils fabex.utilities.image_utils fabex.utilities.index_utils fabex.utilities.loop_utils fabex.utilities.machine_utils fabex.utilities.material_utils fabex.utilities.numba_utils fabex.utilities.ocl_utils fabex.utilities.operation_utils fabex.utilities.orient_utils fabex.utilities.shapely_utils fabex.utilities.simple_utils fabex.utilities.strategy_utils fabex.utilities.thread_utils fabex.utilities.version_utils fabex.version fabex.voronoi

mortise() (in module fabex.joinery) move() (in module fabex.utilities.simple_utils) movement (CAM_OPERATION_Properties attribute), [1] mtc_position (CAM_MACHINE_Properties attribute), [1] multiangle() (in module fabex.puzzle_joinery) multiangle_gender (CamCurvePuzzle attribute), [1]

N

name (CAM_CHAIN_Properties attribute), [1] (CAM_OP_REFERENCE_Properties attribute), [1] (CAM_OPERATION_Properties attribute), [1]

next() (SiteList.Iterator method) numpy_save() (in module fabex.utilities.image_utils) numpy_to_image() (in module fabex.utilities.image_utils) NUMPYALG (in module fabex.constants)

O

obj_from_pydata() (in module fabex.gcode_import_parser) object_name (CAM_OPERATION_Properties attribute), [1] objects (CAM_OPERATION_Properties attribute), [1] ocl_sample() (in module fabex.utilities.ocl_utils) OCL_SCALE (in module fabex.constants) oclGetWaterline() (in module fabex.cam_chunk) oclResampleChunks() (in module fabex.cam_chunk) oclSample() (in module fabex.utilities.ocl_utils) oclSamplePoints() (in module fabex.utilities.ocl_utils) oclWaterlineLayerHeights() (in module fabex.utilities.ocl_utils) offset (CamCurveHatch attribute), [1] (CamOffsetSilhouete attribute), [1] (CamSineCurve attribute), [1] (GcodeModel attribute) offset_area() (in module fabex.utilities.image_utils) offset_image (CAM_OPERATION_Properties attribute), [1] offset_z() (CamPathChunk method) old_rotation_a (CAM_OPERATION_Properties attribute), [1] old_rotation_b (CAM_OPERATION_Properties attribute), [1] on_blender_startup() (in module fabex) (in module fabex.utilities.addon_utils) on_engine_change() (in module fabex) (in module fabex.utilities.addon_utils) op_preset_update (CamAddonPreferences attribute), [1] open_curve() (in module fabex.puzzle_joinery) open_type (CamOffsetSilhouete attribute), [1] opencamlib_version() (in module fabex.utilities.version_utils) opencurve (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] operation (CAMSimulate attribute), [1] (CAMSimulateChain attribute), [1] operation_limit (CAM_OPERATION_Properties attribute), [1]

operation_location (CAM_INTERFACE_Properties attribute), [1] operation_valid() (in module fabex.utilities.operation_utils) operations (CAM_CHAIN_Properties attribute), [1] opname (threadCom attribute) ops_register() (in module fabex) ops_unregister() (in module fabex) optimisation (CAM_OPERATION_Properties attribute), [1] optimize (CAM_OPTIMISATION_Properties attribute), [1] optimize_chunk() (in module fabex.utilities.chunk_utils) optimize_threshold (CAM_OPTIMISATION_Properties attribute), [1] order_points() (Context method) origin (CAM_MATERIAL_Properties attribute), [1] other_edge (CamCurveBoneFilletOvercuts attribute), [1] out_bisector() (Context method) out_edge() (Context method) out_site() (Context method) out_text (CAM_OPERATION_Properties attribute), [1] (threadCom attribute) out_triple() (Context method) out_vertex() (Context method) outlines_count (CAM_OPERATION_Properties attribute), [1] output (WM_OT_gcode_import attribute), [1] output_block_numbers (CAM_MACHINE_Properties attribute), [1] output_G43_on_tool_change (CAM_MACHINE_Properties attribute), [1] output_header (CAM_OPERATION_Properties attribute), [1] output_tool_change (CAM_MACHINE_Properties attribute), [1] output_tool_definitions (CAM_MACHINE_Properties attribute), [1] output_trailer (CAM_OPERATION_Properties attribute), [1] overcut (CamCurveDrawer attribute), [1] (CamCurvePuzzle attribute), [1] overcut_diameter (CamCurveDrawer attribute), [1] (CamCurvePuzzle attribute), [1] overlaps() (in module fabex.utilities.compare_utils)

P

p (in module fabex.testing) pack_curves() (in module fabex.pack) parallel_angle (CAM_OPERATION_Properties attribute), [1] parallel_pocket_angle (CAM_OPERATION_Properties attribute), [1] parallel_pocket_contour (CAM_OPERATION_Properties attribute), [1] parallel_pocket_crosshatch (CAM_OPERATION_Properties attribute), [1] parallel_step_back (CAM_MOVEMENT_Properties attribute), [1] parent_child() (in module fabex.utilities.chunk_utils) parent_child_distance() (in module fabex.utilities.chunk_utils) parent_child_poly() (in module fabex.utilities.chunk_utils) parent_path_to_object (CAM_OPERATION_Properties attribute), [1] parents (CamPathChunk attribute) parse_args() (GcodeParser method) parse_file() (GcodeParser method) parse_G0() (GcodeParser method) parse_G1() (GcodeParser method) parse_G90() (GcodeParser method) parse_G91() (GcodeParser method) parse_G92() (GcodeParser method) parse_line() (GcodeParser method) parser (GcodeModel attribute) pass_per_radius (DoBasRelief attribute), [1] path (in module fabex.gcode_import_parser) path_object_name (CAM_OPERATION_Properties attribute), [1] PathExport (class in fabex.operators) (class in fabex.operators.path_ops) PathExportChain (class in fabex.operators) (class in fabex.operators.path_ops) PathsAll (class in fabex.operators) (class in fabex.operators.path_ops) PathsBackground (class in fabex.operators) (class in fabex.operators.path_ops) PathsChain (class in fabex.operators) (class in fabex.operators.path_ops) pencil_threshold (CAM_OPERATION_Properties attribute), [1] perimeter_cut (CamCurveIntarsion attribute), [1] period (CamSineCurve attribute), [1] period_a (CamLissajousCurve attribute), [1] period_b (CamLissajousCurve attribute), [1] period_z (CamLissajousCurve attribute), [1] pid (CAM_OPERATION_Properties attribute), [1] pixsize (CAM_OPTIMISATION_Properties attribute), [1] plasma_delay (CAM_OPERATION_Properties attribute), [1] plasma_dwell (CAM_OPERATION_Properties attribute), [1] plasma_off (CAM_OPERATION_Properties attribute), [1] plasma_on (CAM_OPERATION_Properties attribute), [1] plate_thickness (CamCurveInterlock attribute), [1] (CamCurveMortise attribute), [1] plate_type (CamCurvePlate attribute), [1] plunge_angle (CAM_OPERATION_Properties attribute), [1] plunge_feedrate (CAM_OPERATION_Properties attribute), [1] pm (Halfedge attribute), [1] pocket() (in module fabex.strategy) pocket_option (CAM_OPERATION_Properties attribute), [1] pocket_shape (CamCurveHatch attribute), [1] pocket_to_curve (CAM_OPERATION_Properties attribute), [1] pocket_type (CAM_OPERATION_Properties attribute), [1] Point (class in fabex.utilities.geom_utils) point_on_line() (in module fabex.gcode_path) points (CamPathChunkBuilder attribute) pointSamplesFromOCL() (in module fabex.utilities.ocl_utils) poll() (CalculatePath class method), [1] (CamBridgesAdd class method), [1] (CamChainAdd class method), [1] (CamChainOperationAdd class method), [1] (CamChainOperationDown class method), [1] (CamChainOperationRemove class method), [1] (CamChainOperationUp class method), [1] (CamChainRemove class method), [1] (CamCurveBoneFilletOvercuts class method), [1] (CamCurveBoolean class method), [1] (CamCurveConvexHull class method), [1] (CamCurveHatch class method), [1] (CamCurveIntarsion class method), [1] (CamCurveMortise class method), [1] (CamCurveRemoveDoubles class method), [1] (CamCurveSimpleOvercuts class method), [1] (CamMeshGetPockets class method), [1] (CamObjectSilhouette class method), [1] (CamOffsetSilhouete class method), [1] (CamOperationAdd class method), [1] (CamOperationCopy class method), [1] (CamOperationMove class method), [1] (CamOperationRemove class method), [1] (CamOrientationAdd class method), [1] (CamPackObjects class method), [1] (CAMSimulateChain class method), [1] (DoBasRelief class method), [1] (PathExportChain class method), [1] (PathsChain class method), [1]

poly (CamPathChunk attribute) polygon_boolean() (in module fabex.cam_chunk) polygon_convex_hull() (in module fabex.cam_chunk) polygons (Context attribute) pop() (CamPathChunk method) pop_min_halfedge() (PriorityQueue method) position_object() (in module fabex.utilities.bounds_utils) post_processor (CAM_MACHINE_Properties attribute), [1] PRECISION (in module fabex.constants) prepare_area() (in module fabex.utilities.image_utils) prepare_bullet_collision() (in module fabex.collision) prepare_indexed() (in module fabex.utilities.index_utils) preset_defines (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] preset_menu (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] preset_subdir (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] preset_values (AddPresetCamCutter attribute), [1] (AddPresetCamMachine attribute), [1] (AddPresetCamOperation attribute), [1] pressure_angle (CamCurveGear attribute), [1] PriorityQueue (class in fabex.voronoi) problem_areas() (in module fabex.bas_relief) ProblemAreas (class in fabex.operators) (class in fabex.operators.bas_relief_ops) proc (threadCom attribute) processes (DoBasRelief attribute), [1] (ProblemAreas attribute), [1] profile_start (CAM_OPERATION_Properties attribute), [1] progress() (in module fabex.utilities.simple_utils) progress_async() (in module fabex.utilities.async_utils) project_curve() (in module fabex.strategy) prolongate() (in module fabex.bas_relief) props_register() (in module fabex) props_unregister() (in module fabex) protect_vertical (CAM_MOVEMENT_Properties attribute), [1] protect_vertical_limit (CAM_MOVEMENT_Properties attribute), [1] PY3 (in module fabex.constants) PYTHON_BIN (in module fabex.constants)

Q

qnext (Halfedge attribute)

R

R (CamHypotrochoidCurve attribute), [1] r (CamHypotrochoidCurve attribute), [1] rack() (in module fabex.involute_gear) rack_height (CamCurveGear attribute), [1] rack_tooth_per_hole (CamCurveGear attribute), [1] radius (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] radius_around_model (CAM_MATERIAL_Properties attribute), [1] ramp (CAM_MOVEMENT_Properties attribute), [1] ramp_contour() (CamPathChunk method) ramp_in_angle (CAM_MOVEMENT_Properties attribute), [1] ramp_out (CAM_MOVEMENT_Properties attribute), [1] ramp_out_angle (CAM_MOVEMENT_Properties attribute), [1] ramp_zig_zag() (CamPathChunk method) RE (Edge attribute) recover_silhouettes (DoBasRelief attribute), [1] reg (Edge attribute), [1] register() (in module fabex) (in module fabex.operators) (in module fabex.properties) relative (GcodeModel attribute) relief() (in module fabex.bas_relief) ReliefError reload_paths() (in module fabex.utilities.operation_utils) remove_doubles() (in module fabex.utilities.simple_utils) remove_multiple() (in module fabex.utilities.simple_utils)

remove_orientation_object() (in module fabex.utilities.orient_utils) remove_redundant_points (CAM_OPERATION_Properties attribute), [1] rename() (in module fabex.utilities.simple_utils) render_sample_image() (in module fabex.utilities.image_utils) render_scene() (in module fabex.bas_relief) resolution (CamCurveFlatCone attribute), [1] (CamCurvePlate attribute), [1] restore_visibility() (in module fabex.utilities.chunk_utils) restrict_buffer() (in module fabex.bas_relief) retract_height (CAM_MOVEMENT_Properties attribute), [1] retract_radius (CAM_MOVEMENT_Properties attribute), [1] retract_tangential (CAM_MOVEMENT_Properties attribute), [1] reverse() (CamPathChunk method) right (Halfedge attribute), [1] right_reg() (Halfedge method) rightend (EdgeList attribute) rim_size (CamCurveGear attribute), [1] rotary_axis_1 (CAM_OPERATION_Properties attribute), [1] rotary_axis_2 (CAM_OPERATION_Properties attribute), [1] rotate (CamPackObjects attribute), [1] rotate() (in module fabex.utilities.simple_utils) rotate_angle (CamPackObjects attribute), [1] rotate_point_by_point() (in module fabex.utilities.chunk_utils) rotation_a (CAM_OPERATION_Properties attribute), [1] rotation_b (CAM_OPERATION_Properties attribute), [1] rotation_to_2_axes() (in module fabex.utilities.orient_utils) rotations (CamPathChunkBuilder attribute)

S

s_rotate() (in module fabex.pack) s_sine() (in module fabex.utilities.geom_utils) safe_filename() (in module fabex.utilities.simple_utils) sample_chunks() (in module fabex.cam_chunk) sample_chunks_n_axis() (in module fabex.cam_chunk) sample_path_low() (in module fabex.cam_chunk) scale_down_before (DoBasRelief attribute), [1] scale_down_before_use (DoBasRelief attribute), [1] Segment (class in fabex.gcode_import_parser) segments (GcodeModel attribute) (Layer attribute) segments_to_meshdata() (in module fabex.gcode_import_parser) select_multiple() (in module fabex.utilities.simple_utils) set_chunks_z() (in module fabex.utilities.chunk_utils) set_clip_buffer() (Context method) set_endpoint() (Edge method) set_points() (CamPathChunk method) set_relative() (GcodeModel method) set_site_number() (SiteList method) set_z() (CamPathChunk method) shading (CAM_INTERFACE_Properties attribute), [1] SHAPELY (in module fabex.constants) shapely_remove_doubles() (in module fabex.utilities.shapely_utils) shapely_to_chunks() (in module fabex.cam_chunk) shapely_to_coordinates() (in module fabex.utilities.shapely_utils) shapely_to_curve() (in module fabex.utilities.shapely_utils) shapely_to_multipolygon() (in module fabex.utilities.shapely_utils) shapely_version() (in module fabex.utilities.version_utils) sheet_fill_direction (CamPackObjects attribute), [1] sheet_x (CamPackObjects attribute), [1] sheet_y (CamPackObjects attribute), [1] shift (CamLissajousCurve attribute), [1] (CamSineCurve attribute), [1] shift() (CamPathChunk method) show_popups (CamAddonPreferences attribute), [1] show_progress() (AsyncOperatorMixin method) side_height (CamCurveMortise attribute), [1] silhouette (CAM_OPERATION_Properties attribute), [1] silhouette_exponent (DoBasRelief attribute), [1] silhouette_offset() (in module fabex.cam_chunk) silhouette_scale (DoBasRelief attribute), [1] silhouette_threshold (DoBasRelief attribute), [1] sim_cutter_spot() (in module fabex.simulation) simplify_tolerance (CAM_OPERATION_Properties attribute), [1] simppoly (CamPathChunk attribute) simulation_detail (CAM_OPTIMISATION_Properties attribute), [1] single_interlock() (in module fabex.joinery) Site (class in fabex.voronoi) SiteList (class in fabex.voronoi) SiteList.Iterator (class in fabex.voronoi) sitenum (Site attribute) size (CAM_MATERIAL_Properties attribute), [1] skin (CAM_OPERATION_Properties attribute), [1]

slice_3d (CamSliceObjects attribute), [1] slice_above_0 (CamSliceObjects attribute), [1] slice_detail (CAM_OPERATION_Properties attribute), [1] slice_distance (CamSliceObjects attribute), [1] slicing_2d() (in module fabex.slice) slicing_3d() (in module fabex.slice) slope_array() (in module fabex.joinery) small_d (CamCurveFlatCone attribute), [1] smooth() (in module fabex.bas_relief) smooth_iterations (DoBasRelief attribute), [1] snrm() (in module fabex.bas_relief) solve_pde_multigrid() (in module fabex.bas_relief) sort_chunks() (in module fabex.cam_chunk) sorted (CamPathChunk attribute) source_image_crop (CAM_OPERATION_Properties attribute), [1] source_image_crop_end_x (CAM_OPERATION_Properties attribute), [1] source_image_crop_end_y (CAM_OPERATION_Properties attribute), [1] source_image_crop_start_x (CAM_OPERATION_Properties attribute), [1] source_image_crop_start_y (CAM_OPERATION_Properties attribute), [1] source_image_name (CAM_OPERATION_Properties attribute), [1] (DoBasRelief attribute), [1] source_image_offset (CAM_OPERATION_Properties attribute), [1] source_image_scale_z (CAM_OPERATION_Properties attribute), [1] source_image_size_x (CAM_OPERATION_Properties attribute), [1] source_image_size_y (CAM_OPERATION_Properties attribute), [1] source_valid() (in module fabex.utilities.operation_utils) spindle_default (CAM_MACHINE_Properties attribute), [1] spindle_max (CAM_MACHINE_Properties attribute), [1] spindle_min (CAM_MACHINE_Properties attribute), [1] spindle_rotation (CAM_MOVEMENT_Properties attribute), [1] spindle_rpm (CAM_OPERATION_Properties attribute), [1] spindle_start_time (CAM_MACHINE_Properties attribute), [1] split_layers (WM_OT_gcode_import attribute), [1] split_limit (CAM_MACHINE_Properties attribute), [1] spoke_amount (CamCurveGear attribute), [1] start_block_number (CAM_MACHINE_Properties attribute), [1] start_type (CAM_OPERATION_Properties attribute), [1] starting_position (CAM_MACHINE_Properties attribute), [1] startpoints (CamPathChunkBuilder attribute) stay_low (CAM_MOVEMENT_Properties attribute), [1] stem_size (CamCurvePuzzle attribute), [1] stepdown (CAM_OPERATION_Properties attribute), [1] straight (CAM_OPERATION_Properties attribute), [1] (CamCurveHatch attribute), [1] strategy (CAM_OPERATION_Properties attribute), [1] strategy_4_axis (CAM_OPERATION_Properties attribute), [1] strategy_5_axis (CAM_OPERATION_Properties attribute), [1] style (CamCurveBoneFilletOvercuts attribute), [1] (CamOffsetSilhouete attribute), [1] (Segment attribute) subdivide (WM_OT_gcode_import attribute), [1] subdivide() (GcodeModel method) subdivide_long_edges() (in module fabex.collision) subdivide_short_lines() (in module fabex.utilities.simple_utils)

T

t() (in module fabex.puzzle_joinery) tab (CamCurveFlatCone attribute), [1] tangent_angle (CamCurveInterlock attribute), [1] test_stroke() (in module fabex.utilities.image_utils) test_stroke_binary() (in module fabex.utilities.image_utils) testAll() (in module fabex.testing) testCalc() (in module fabex.testing) testCutout() (in module fabex.testing) testOperation() (in module fabex.testing) testParallel() (in module fabex.testing) testPocket() (in module fabex.testing) tests (in module fabex.testing) testSimulation() (in module fabex.testing) testWaterline() (in module fabex.testing) thickness_mm (DoBasRelief attribute), [1] thread_read() (in module fabex.utilities.thread_utils) threadCom (class in fabex.utilities.thread_utils) threshold (CamCurveBoneFilletOvercuts attribute), [1] (CamCurveSimpleOvercuts attribute), [1] (CamMeshGetPockets attribute), [1] tick() (AsyncOperatorMixin method) tile() (in module fabex.puzzle_joinery) tile_x_amount (CamCurvePuzzle attribute), [1] tile_y_amount (CamCurvePuzzle attribute), [1] timer (AsyncOperatorMixin attribute) timer_update() (in module fabex) (in module fabex.utilities.thread_utils) timing_add() (in module fabex.utilities.simple_utils) timing_init() (in module fabex.utilities.simple_utils) timing_print() (in module fabex.utilities.simple_utils) timing_start() (in module fabex.utilities.simple_utils) to_chunk() (CamPathChunkBuilder method) tolerance (CamCurveIntarsion attribute), [1] (CamPackObjects attribute), [1]

TOLERANCE (in module fabex.constants) tonemap() (in module fabex.bas_relief) toolnumber (GcodeModel attribute) (Segment attribute) tools_location (CAM_INTERFACE_Properties attribute), [1] tooth_amount (CamCurveGear attribute), [1] tooth_spacing (CamCurveGear attribute), [1] top_bottom (CamCurveMortise attribute), [1] triangle() (in module fabex.utilities.geom_utils) triangles (Context attribute) triangulate (Context attribute) tuple_add() (in module fabex.utilities.simple_utils) tuple_length() (in module fabex.utilities.simple_utils) tuple_multiply() (in module fabex.utilities.simple_utils) tuple_subtract() (in module fabex.utilities.simple_utils) twist_female() (in module fabex.puzzle_joinery) twist_keep (CamCurvePuzzle attribute), [1] twist_line (CamCurvePuzzle attribute), [1] twist_line() (in module fabex.joinery) twist_line_amount (CamCurvePuzzle attribute), [1] twist_lock (CamCurvePuzzle attribute), [1] twist_male() (in module fabex.puzzle_joinery) twist_percent (CamCurvePuzzle attribute), [1] twist_separator (CamCurvePuzzle attribute), [1] twist_separator_amount (CamCurvePuzzle attribute), [1] twist_separator_edge_distance (CamCurvePuzzle attribute), [1] twist_separator_slot() (in module fabex.joinery) twist_separator_spacing (CamCurvePuzzle attribute), [1] twist_thick (CamCurvePuzzle attribute), [1] type (CAM_MOVEMENT_Properties attribute), [1] (Segment attribute) typecurve (CamHypotrochoidCurve attribute), [1]

U

union() (in module fabex.utilities.simple_utils) unique() (in module fabex.utilities.compare_utils) unit_value_to_string() (in module fabex.utilities.simple_utils) unregister() (in module fabex) (in module fabex.operators) (in module fabex.properties) update_ambient_tag (CAM_OPERATION_Properties attribute), [1] update_bridges() (in module fabex.utilities.operation_utils) update_bullet_collision_tag (CAM_OPERATION_Properties attribute), [1] update_chipload() (in module fabex.utilities.operation_utils) update_cutout() (in module fabex.utilities.strategy_utils) update_exact() (in module fabex.utilities.strategy_utils) update_exact_mode() (in module fabex.utilities.strategy_utils) update_image_size_y() (in module fabex.utilities.operation_utils) update_interface() (in module fabex.properties.interface_props) update_layout() (in module fabex.properties.interface_props) update_machine() (in module fabex.utilities.machine_utils) update_material() (in module fabex.utilities.material_utils) update_offset_image() (in module fabex.utilities.operation_utils) update_offset_image_tag (CAM_OPERATION_Properties attribute), [1] update_opencamlib() (in module fabex.utilities.strategy_utils) update_opencamlib_1() (in module fabex.utilities.strategy_utils) update_operation() (in module fabex.properties) (in module fabex.utilities.operation_utils), [1] update_operation_valid() (in module fabex.utilities.operation_utils)

update_poly() (CamPathChunk method) update_rest() (in module fabex.utilities.operation_utils) update_rotation() (in module fabex.utilities.operation_utils) update_shading() (in module fabex.properties.interface_props) update_silhouette_tag (CAM_OPERATION_Properties attribute), [1] update_strategy() (in module fabex.utilities.strategy_utils) update_user_layout() (in module fabex.properties.interface_props) update_Z_buffer_image() (in module fabex.utilities.operation_utils) update_z_buffer_image_tag (CAM_OPERATION_Properties attribute), [1] update_zbuffer_image() (in module fabex.utilities.operation_utils) use_bridge_modifiers (CAM_OPERATION_Properties attribute), [1] use_bridges (CAM_OPERATION_Properties attribute), [1] use_bridges() (in module fabex.bridges) use_exact (CAM_OPTIMISATION_Properties attribute), [1] use_image_source (DoBasRelief attribute), [1] use_layers (CAM_OPERATION_Properties attribute), [1] use_limit_curve (CAM_OPERATION_Properties attribute), [1] use_modifiers (CAM_OPERATION_Properties attribute), [1] use_opencamlib (CAM_OPTIMISATION_Properties attribute), [1] use_planar (DoBasRelief attribute), [1] use_position_definitions (CAM_MACHINE_Properties attribute), [1] USE_PROFILER (in module fabex.constants) useG64 (CAM_MOVEMENT_Properties attribute), [1] user_main_location (CamAddonPreferences attribute), [1] user_operation_location (CamAddonPreferences attribute), [1] user_tools_location (CamAddonPreferences attribute), [1]

V

valid (CAM_CHAIN_Properties attribute), [1] (CAM_OPERATION_Properties attribute), [1] variable_finger() (in module fabex.joinery) vcycle_iterations (DoBasRelief attribute), [1] vert() (in module fabex.bas_relief)

vertex (Halfedge attribute), [1] vertical_finger() (in module fabex.joinery) vertices (Context attribute) view_layer_name (DoBasRelief attribute), [1] voronoi() (in module fabex.voronoi)

W

warn() (GcodeModel method) (GcodeParser method) warnings (CAM_INFO_Properties attribute), [1] was_hidden_dict (in module fabex.constants) waterline_fill (CAM_OPERATION_Properties attribute), [1] waterline_project (CAM_OPERATION_Properties attribute), [1] wave (CamSineCurve attribute), [1] wave_a (CamLissajousCurve attribute), [1] wave_amount (CamSineCurve attribute), [1]

wave_angle_offset (CamSineCurve attribute), [1] wave_b (CamLissajousCurve attribute), [1] wave_distance (CamSineCurve attribute), [1] width (CamCurveDrawer attribute), [1] (CamCurvePlate attribute), [1] (CamCurvePuzzle attribute), [1] width_mm (DoBasRelief attribute), [1] WM_OT_gcode_import (class in fabex.operators) (class in fabex.operators.gcode_import_op) working_area (CAM_MACHINE_Properties attribute), [1]

X

x (Site attribute) x_string (CamCustomCurve attribute), [1] x_y_distance_to() (CamPathChunk method) x_y_distance_within() (CamPathChunk method)

xhatch (CamCurveHatch attribute), [1] xmax (SiteList attribute) xmin (EdgeList attribute) (SiteList attribute)

Y

y (Site attribute) y_string (CamCustomCurve attribute), [1] ymax (SiteList attribute)

ymin (PriorityQueue attribute) (SiteList attribute) ystar (Halfedge attribute), [1]

Z

Z (Layer attribute) z_limit (CamMeshGetPockets attribute), [1] z_position (CAM_MATERIAL_Properties attribute), [1] z_string (CamCustomCurve attribute), [1]

zbuffer_image (CAM_OPERATION_Properties attribute), [1] zend (CamPathChunk attribute) zig_zag_ramp (CAM_MOVEMENT_Properties attribute), [1] zstart (CamPathChunk attribute)